A 214 tinplate beer can top end is a metal closure identified by a nominal size code commonly associated with a 2 14/16-inch diameter, or approximately 2.875 in (73.0 mm). That nominal designation is a useful starting point, but it does not by itself confirm compatibility with a can body or seaming line. Before ordering, compare the end drawing and material details with the can maker’s specifications, seamer tooling, and filling-line requirements. At Wanhua, we recommend confirming these interfaces with your production team before finalizing a purchase.
You can find more information on our web, so please take a look.
This guide is for beverage-can manufacturers, breweries, contract fillers, packaging procurement teams, and distributors evaluating 214 tinplate beer can top ends. It is also relevant to buyers comparing suppliers or investigating whether a proposed end can work with an existing can body and seaming setup. The guidance focuses on specification and compatibility rather than claiming that one end design fits every production line. Final acceptance should rely on the relevant drawings, technical review, and production validation.
In a commonly used can-end sizing convention, the code “214” represents a nominal diameter of 2 inches plus 14 sixteenths of an inch. Since 1 in equals 25.4 mm, this corresponds to 2.875 in, or approximately 73.0 mm. Treat these values as a nominal identification reference: actual dimensions, tolerances, and profile details must be confirmed from the supplier’s drawing and the can-system specification.
Two ends that share a nominal size code may still differ in profile, curl geometry, countersink depth, or other details that matter at the seam. A mismatch can affect how an end sits on the body, how the seamer forms the double seam, or how the finished package performs. Compatibility is therefore a system-level question involving the end, can body, seaming rolls and chuck, and production conditions. Do not approve an end based on the “214” label alone.
Ask the supplier for a current technical drawing and specification sheet for the proposed end. Review the drawing with your can-body supplier and production or maintenance team, especially if the end is intended for an existing line. Record the approved revision so that purchasing, quality, and production are checking the same specification. If your project involves a new format, define the required interfaces before requesting a commercial quote.
| Specification area | What to verify | Why it matters |
|---|---|---|
| Nominal size and profile | End designation, overall profile, and drawing dimensions | Helps establish whether the end matches the intended can format and tooling. |
| Seaming interface | Curl, countersink, chuck wall, and other specified seam-related features | These features must be assessed against the body and seamer setup. |
| Material and coating | Tinplate grade or agreed material description, thickness, and internal or external coating requirements | Material and coating choices should suit the product, process, and customer specification. |
| Opening system | Tab style, score configuration, opening direction, and requested performance criteria | Supports the intended consumer-use format and package requirements. |
| Compound and quality controls | Compound requirements, inspection criteria, packaging, and traceability expectations | Provides a basis for supplier review and incoming quality checks. |
For a tinplate end, specify the material and coating requirements rather than assuming all products described as tinplate are interchangeable. Internal coating selection may depend on the beverage formulation and the can system, so it should be reviewed against the product owner’s requirements. Likewise, agree on the opening format and tab configuration using a drawing or approved sample. Where a requirement is not yet defined, identify it as an open item instead of allowing different parties to make assumptions.
Start by identifying the can body and the production line for which the end is intended. Confirm the body-end combination with the can supplier and check that the seamer chuck and roll setup are suitable for the proposed geometry. For a new package, coordinate these details across the end supplier, body supplier, filler, and equipment team. For a replacement or second-source project, compare the proposed specification directly with the currently approved end.
If you want to learn more, please visit our website Wanhua.
The beverage application also matters. Buyers should share relevant product and process information with their packaging partners so that material, coating, and package requirements can be reviewed appropriately. Avoid assuming that a format suitable for one beverage or line automatically meets another customer’s requirements. If the end is for a regulated market or a customer-controlled package, include the applicable documentation and approval requirements in the inquiry.
Pricing for 214 tinplate beer can top ends can depend on the agreed specification, order quantity, packaging requirements, destination, and any customization or documentation needs. Minimum order quantity and lead time are supplier- and project-specific, so buyers should request current terms rather than rely on a general estimate. A technically incomplete inquiry can make quotations difficult to compare because suppliers may be pricing different assumptions. Ask each bidder to state its specification basis, quoted quantity, delivery terms, and any conditions that affect the offer.
For a useful RFQ, include the required end size, technical drawing or reference specification, material and coating requirements, opening format, estimated demand, delivery location, and requested schedule. Also identify whether samples, trial quantities, or production-line validation are required. If the project has a target launch date, share it early and ask the supplier to confirm feasibility based on the final approved specification. Evaluate total sourcing fit alongside unit price, including technical support, communication, packaging, and change-control arrangements.
Choose a supplier that can review the application and respond to the technical information provided, not only quote a nominal size. Ask how the supplier identifies product revisions, handles specification changes, and supports questions about compatibility. Request the documents relevant to your project and confirm which requirements the supplier can meet before placing an order. Do not interpret a quotation or sample as proof of line compatibility unless the required review and validation have been completed.
Wanhua supports B2B buyers evaluating beer can top ends by discussing the intended application, reviewing the information available, and clarifying the specification needed for a quotation. Share your 214 requirement together with drawings, material and coating expectations, opening format, order estimate, and delivery destination. Our team can then confirm which details require further review and provide the relevant commercial information for the proposed scope. Compatibility remains subject to confirmation against your can body, equipment, and production requirements.
A 214 tinplate beer can top end is identified by a nominal size code commonly corresponding to 2.875 in (approximately 73.0 mm), but the code alone does not establish a production-ready match. To select the right end, verify its drawing, seam-related geometry, material and coating, opening system, and quality requirements against the complete packaging line. Request current pricing, MOQ, and lead-time terms against a clearly defined specification, and arrange sample or line validation when appropriate. To begin, send Wanhua your application details and technical references so we can discuss the requirements for your inquiry.
For more 214 Tinplate Beer Can Top Endsinformation, please contact us. We will provide professional answers.

Comments
0